When sulphuric acid is added to a salt solution, it will react with the salt to form sulphate and hydrogen ions. The reaction is as follows: H2SO4 + NaCl —> NaHSO4 + HCl This reaction is highly exothermic, meaning that it releases a large amount of heat energy. As a result, the solution may become …
Sulphuric acid : Reaction with salt – സൾഫ്യൂറിക് ആസിഡ് : ഉപ്പുമായുള്ള പ്രതികരണം Read More »
Sulphuric acid is a very corrosive acid and it can cause severe burns and damage when it comes into contact with skin. It is also very hygroscopic, meaning that it easily absorbs moisture from its surroundings. As a result, it should never be left out in open air as it will quickly absorb moisture and …
Drying nature of sulphuric acid – സൾഫ്യൂറിക് ആസിഡിന്റെ ശോഷകാര സ്വഭാവം Read More »
Dehydrating sulphuric acid with heat is a common industrial process. It is done by heating it to temperatures above 300°C (572°F). This causes the sulphuric acid to rapidly lose its water content, drying it out and leaving behind a dense, anhydrous (water-free) form of the acid. The dehydrated acid is commonly used in the production …
Dehydrating nature sulphuric acid – സൾഫ്യൂറിക് ആസിഡിന്റെ നിര്ജലീകരണഗുണം Read More »
Physical properties Colour: Colourless to slight yellow Odour: Odourless Boiling Point: 338°C (640°F) Melting Point: 10°C (50°F) Solubility: Soluble in water Vapour Pressure: 0.87 kPa at 25°C Molecular Weight: 98.08 g/mol Density: 1.84 g/mL Chemical properties Oxidation State: +6 pH: 1.2 – 2.0 Ionization Energy: 9.8 eV Electro negativity: 2.2 Heat of Formation: -845 kJ/mol …
The industrial preparation of sulphuric acid involves the oxidation of sulphur dioxide with oxygen in the presence of a catalyst. This process is known as the contact process. The reaction takes place in a series of steps. Sulphur dioxide is produced by burning sulphur or by the catalytic oxidation of sulphur compounds. The sulphur dioxide …
Sulphuric acid is a strong mineral acid with the molecular formula H2SO4. It is a highly corrosive acid and is an important industrial chemical, used in the production of fertilizers, explosives, and other chemical products. It is also used in car batteries and to clean metal surfaces.
Catalyst is a substance that can facilitate the reaction rate of a chemical reaction without being consumed or participating in the reaction itself. Chemical equilibrium is a state of balance between the reactants and the products of a chemical reaction. This balance is maintained by the forward and backward reactions occurring at the same rate.
Endothermic reactions are reactions that require energy to occur. This energy can be in the form of heat, which is the most common type of energy used to drive reactions. At equilibrium, the amount of energy being released by the reaction is equal to the amount of energy being absorbed. As a result, endothermic reactions …
Temperature and equilibrium – താപനിലയും സന്തുലിതാവസ്ഥയും Read More »
Pressure is a measure of the force exerted on a given area, and is typically expressed in units of atmospheres (atm). Chemical equilibrium is a state in which the concentrations of reactants and products in a chemical reaction remain constant over time. This means that the forward and reverse reactions are occurring at the same …
Pressure and chemical equilibrium – മർദ്ദവും രാസ സന്തുലിതാവസ്ഥയും Read More »
The concentration of the equilibrium haber process will have an effect on the rate of the reaction. If the concentration of reactants is increased, then the rate of the reaction will be faster. Conversely, if the concentration of reactants is decreased, then the rate of the reaction will be slower. The equilibrium haber process is …
Influence of concentration of equilibrium – സന്തുലിതാവസ്ഥയില് ഗാഡതയുടെ സ്വാധീനം Read More »